Routine Operation

To ensure precise measurement results the following information about care, calibration intervals and maintenance should be observed:

Caring for the Moisture Analyzer

  • Reinigen.jpgKeep the sample pan area clean (e.g. using a brush).
  • Clean dirt off the temperature sensor and protective glass on the heating module (for details, see operating instructions).
  • Use a mild cleaning agent (e.g. glass cleaner) to clean the instrument and sample pan area.
  • Replace the halogen radiator reflector if the reflector layer is damaged.pflege.jpg
Precision with Highspeed

Präzision mit HighspeedThe Halogen Moisture Analyzers offer both precision and speed. You save time and costs and increase efficiency.

Industry Solutions
Method Database

Guide to Moisture Analysis

Calibration and maintenance intervals

  • By regularly calibrating (testing) and if necessary adjusting the heating module, you will ensure consistent and reproducible heat output for the entire lifetime of your instrument. This will also mean that your results can be compared with those from other devices of the same model. We therefore recommend that you define test intervals for testing the weighing unit and heating module (depending on risk).serviceXXL.jpg
  • Annual maintenance performed by the METTLER TOLEDO Service team will guarantee the quality, measurement accuracy and value retention of your Halogen Moisture Analyzer.

Tip: The Halogen Moisture Analyzer HR83 allows you to freely select the temperature of the test at between 50 °C and 180 °C. This allows you to test the heating output at your specific drying temperature (e.g. 130 °C).